Page tree
Skip to end of metadata
Go to start of metadata
Supported VersionsLast Updated
1.14.00 & higher2014/01/08
;; Extended configuration file for SolusVM
;; Last updated 2014/01/27
;; Copy this file to /usr/local/solusvm/data/config.ini

[XEN]
;Create Xen PV swap logical volumes in the specified group
;pv_swap_logical_volume_group = 'swap' 
						
[KVM]
;; Don't write memtune settings to domains configuration file (true|false)
;domain_config_exclude_memtune = false
			
;; Use the latest memtune settings (true|false)
;domain_config_experimental_memtune = false
			
;; When writing the internal network configuration within the virtual server
;; don't add the gateway variable			
;domain_simple_internal_network = false
			
;; If memtune hard_limit is used in the domains configuration file set
;; the specified percentage hard_limIt calculated from the memory
;; setting (1 <> 300)
;domain_config_memtune_hard_limit_percent_memory = 75
			
;; If memtune soft_limit is used in the domains configuration file set
;; the specified percentage soft_limit calculated from the memory
;; setting (1 <> 300)
;domain_config_memtune_soft_limit_percent_memory = 50
			
;; If memtune swap_hard_limit is used in the domains configuration file set
;; the specified percentage swap_hard_limit calculated from the memory
;; setting (1 <> 300)
;domain_config_memtune_swap_hard_limit_percent_memory = 50
			
;; If using experimental memtune enabling this will only set the soft_limit
;; setting. domain_config_memtune_soft_limit_percent_memory will also be
;; used (true|false)
;domain_config_soflimit_memtune_only = false
			
;; lvcreate (-i) stripes (default not set). Numeric value only
;lvcreate_stripes = 1
			
;; lvcreate (-I) stripesize (default not set). Numeric value only(kilobytes)
;lvcreate_stripe_size = 512
			
;; lvcreate (-c) chunksize (default not set). Numeric value only (kilobytes)
;lvcreate_chunk_size = 512
			
;; lvcreate (-aey) Use the -aey flag to activate logical volume exclusively on the host node (true|false)
;lvcreate_aey = false

[DHCPD]
;; When writing the internal network configuration to dhcpd.conf don't add the
;; gateway and nameserver variables
;config_simple_internal_network = false
		
[BANDWIDTH_COUNTING]
;; Offsets for ipv4 bandwidth counting. (- will divide|+ will multiply).
;; Format "IPADDRESS,INBOUND_OFFSET,OUTBOUND_OFFSET"
;;ipv4_count_offset[] = "123.123.123.5,-3,0"
;;ipv4_count_offset[] = "123.123.123.5,+2,-1"
;;ipv4_count_offset[] = "123.123.123.5,-3,0"

;; Offsets for ipv6 bandwidth counting. (- will divide|+ will multiply).
;; Format "IPADDRESS,INBOUND_OFFSET,OUTBOUND_OFFSET"
;;ipv6_count_offset[] = "fe80::227:eff:fe09:cb2,-3,0"
;;ipv6_count_offset[] = "fe80::227:eff:fe09:cb2,+2,-1"
;;ipv6_count_offset[] = "fe80::227:eff:fe09:cb2,-3,0"

[CONNECTION_MONITOR]
;; Run a second connection check if the first check fails. This setting is master only. (true|false)
;extra_pass_on_fail = false
  • No labels